• 出版社/出版日：Mordor Intelligence / 2021年5月25日
|Single User||￥467,500 (USD4,250)||▷ お問い合わせ|
|Team User||￥522,500 (USD4,750)||▷ お問い合わせ|
|Corporate License||￥825,000 (USD7,500)||▷ お問い合わせ|
The global advanced functional materials market is expected to grow at a CAGR of more than 6% during the forecast period (2021-2026).
COVID-19 pandemic has resulted in the closure of manufacturing facilities. Due to this cause, the consumption of advanced functional materials, specifically nanomaterials and conductive polymers were highly reduced, which has constrained the growth of the market globally. In addition, advanced functional materials find their major application in the electric and electronics, and automotive industries. The production of smartphones and other electronic products was highly declined in 2020. Additionally, automobile production in 2020 has witnessed a decline of 15.8% compared to 2019 due to the pandemic situation and shutdown of manufacturing facilities.
– In the short term, one of the major factor driving the market studied is the growing advancement in medical devices.
– With an emphasis on diagnostic imaging, implants and regeneration in medicines, equipment manufacturing for drug delivery and biomedical science, the demand of advanced fuctional materials is rising on a rapid pace, which tends to boost the market growth.
– Asia-Pacific region dominated the market across the globe with the largest consumption from countries such as China and India.
Key Market Trends
Aerospace and Defence Segment to Dominate the Market
– The aerospace and defense industry is expected to be one of the largest consumers of advanced functional materials during the forecast period.
– Nanotechnology provides several advances for military and defense applications, that include improvements in biological, nuclear, and chemical sensing. Additionally, usage of nanotechnology also offers offsetting reductions in military manpower and reduced risks to troops on the battlefield, as well as improve vehicle performance.
– Significant growth in the global aerospace industry till 2019 owing to the investments and increasing aircraft orders have propelled the market demand. In 2020, due to the pandemic situation, the investments and demand for air travel have declined causing a negative impact on the market. However, post-recovery from the pandemic, the market is projected to witness huge growth during the forecast period.
– According to Boeing, the market value for commercial airplanes is expected to reach USD 3.1 trillion by 2028, as operators are expected to replace older jets with more fuel-efficient models and expand their fleets to accommodate the steady rise in air travel, across the emerging and established markets.
– The increasing passenger volume and increasing retirements of airplane are expected to drive the need for 44,040 new jets (valued at USD 6.8 trillion) over the next two decades. The global commercial fleet is forecast to reach 50,660 airplanes by 2038, considering all the new airplanes and jets that would remain in service.
– The Chinese defense industry has been growing rapidly, with many Chinese firms displacing Western defense powerhouses. The country invests heavily to upgrade its military, thus, making it’s eight defense firms rank among the top 25 in the world.
– AVIC company ranks third in the world, and it had developed China’s fifth-generation J-20 fighter and the new H-20 stealth bomber, among various other projects.
– Owing to all the abovementioned facors, the market is likely to witness huge growth in the future.
Asia-Pacific Region to Dominate the Market
– Asia-Pacific region was the largest market for advanced functional materials. China accounted for the major chunk of consumption in the region.
– According to the OICA, Asia-Pacific dominated global automobile production in recent years. China is the largest producer of automobiles globally, with a production volume of 25.75 million vehicles in 2019 and reached 25.23 million vehicles in 2020, registering a decline rate of about 2%.
– According to Boeing, about 25% of world air travel is flown within Asia as of the year 2019 and is forecasted that the value will change to 35% of world total air travel in the next two decades, contributing the highest share of intra-regional air travel globally. The region Asia-Pacific region will get 17,390 deliveries of new airplanes in the next two decades, which will increase the number of total airplane fleet to 19,420 in the next two decades, which in turn increases the demand for the studied market in the coming years.
– China has been a key contributor to global air traffic growth, for the past few years. The average passenger growth rate has been over 10% per year. This growth is primarily driven by rising passenger traffic, due to higher spending power and better air connectivity. Thus, increasing passenger traffic is expected to boost the demand for aircraft.
– As of Boeing estimates 2019, the airplane market value will be of USD 1,300 billion in the next 20 years, thus in turn is expected to drive the demand for advanced functional materials in the coming years.
– The Indian aerospace and defence (A&D) market is expected to cross USD 70 billion by 2030, according to the Indian Brand Equity Foundation, led by burgeoning demand for advanced infrastructure and government thrust.
– The defence budget for 2020-21 in India is INR 4,71,378 crore (USD 67.4 billion), up 9.37 percent from 2019-20. The Defence Services Estimates (DSE), which covers the budgets of the three armed forces and the Defence Research and Development Organisation, has received INR 323,053 crore (USD 46.2 billion) from the Ministry of Defence’s overall allocations (DRDO).
– All the aforementioned factors, in turn, are projected to show significant impact on the market growth in the coming years.
The global advanced functional materials market is partially consolidated in nature. Some of the major players include 3M, Arkema Group, Evonik Industries AG, Covestro AG, and BASF SE, amongst others.
Reasons to Purchase this report:
– The market estimate (ME) sheet in Excel format
– 3 months of analyst support
1.1 Study Assumptions
1.2 Scope of the Study
2 RESEARCH METHODOLOGY
3 EXECUTIVE SUMMARY
4 MARKET DYNAMICS
4.1.1 Increased use as an Alternative to Metals and Plastics
4.1.2 Increasing Demand from the Healthcare Industry
4.2.1 Impact of COVID-19 on the Market
4.2.2 Other Restraints
4.3 Industry Value-Chain Analysis
4.4 Porters Five Forces Analysis
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of New Entrants
4.4.4 Threat of Substitute Products and Services
4.4.5 Degree of Competition
5 MARKET SEGMENTATION
5.1.2 Energy Materials
5.1.3 Conductive Polymers
5.1.6 Other Types
5.2 End-user Industry
5.2.1 Electrical and Electronics
5.2.4 Aerospace and Defense
5.2.5 Energy and Power (incl. Chemical Industry)
5.2.6 Other End-user Industries
188.8.131.52 South Korea
184.108.40.206 Rest of Asia-Pacific
5.3.2 North America
220.127.116.11 United States
18.104.22.168 United Kingdom
22.214.171.124 Rest of Europe
5.3.4 South America
126.96.36.199 Rest of South America
5.3.5 Middle-East and Africa
188.8.131.52 Saudi Arabia
184.108.40.206 South Africa
220.127.116.11 Rest of Middle-East and Africa
6 COMPETITIVE LANDSCAPE
6.1 Mergers & Acquisitions, Joint Ventures, Collaborations, and Agreements
6.2 Market Share (%) Analysis**/Ranking Analysis
6.3 Strategies Adopted by Leading Players
6.4 Company Profiles
6.4.2 Arkema Group
6.4.3 BASF SE
6.4.5 Covestro AG
6.4.6 Evonik Industries AG
6.4.7 Hexcel Corporation
6.4.8 KYOCERA Corporation
6.4.11 SHOWA DENKO K.K.
6.4.12 Sumitomo Chemical Co., Ltd.
7 MARKET OPPORTUNITIES AND FUTURE TRENDS
7.1 Growth of Usage in Nano Technology
7.2 Other Opportunities